会议论文

1 Experimental investigation of machining parameters on material removal rate and surface roughness in chemical machining [会议论文]

作者:Ibrahim, Abbas Fadhil^1, Mustafa, Ali Mundher^1

关键词:Experimental investigations;Initial concentration;...

会议举办机构:University of Technology, Baghdad, Iraq^1

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：1 下载：1 ]

摘要

2 Scuffing analysis of roller-shoe mechanism after an aggressive test [会议论文]

作者:Iordache, C.R.^1, Ciornei, F.C.^2, Bujoreanu, C.^1

关键词:Diamond like carbon;High pressure pumps;...

会议举办机构:Gheorghe Asachi Technical University of Iasi-Romania, Department of Mechanical Engineering Mechatronics and Robotics, Blvd. Prof. Mangeron, No. 43, Iasi

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：4 下载：2 ]

摘要

3 Hydroabrasive wear on high carbide infiltration materials [会议论文]

作者:Wesling, V.^1, Reiter, R.^1, Müller, T.^1

关键词:Material characteristics;Material parameter;...

会议举办机构:Clausthal University of Technology, Institute for Welding and Machining, Germany^1

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：2 下载：0 ]

摘要

4 Surface roughness analysis after machining of direct laser deposited tungsten carbide [会议论文]

作者:Wojciechowski, S.^1, Twardowski, P.^1, Chwalczuk, T.^1

关键词:3-D surface topography;Cubic boron nitride (cBN);...

会议举办机构:Poznan University of Technology, Faculty of Mechanical Engineering, Piotrowo 3, 60-965 Poznan, Poland^1

会议时间:

预览 | 原文链接 | 全文 [ 浏览：6 下载：2 ]

摘要

5 Prototyping of Dental Structures Using Laser Milling [会议论文]

作者:Andreev, A.O.^1;Kosenko, M.S.^1;Petrovskiy, V.N.^1;等

关键词:Ceramic structure;High quality;...

会议举办机构:National Research Nuclear University MEPhI, Kashirskoe sh., 31, Moscow, Russia^1

会议时间:2016

预览 | 原文链接 | 全文 [ 浏览：9 下载：0 ]

摘要

6 A Review of Partial Ductile Mode Machining for Brittle Materials [会议论文]

作者:Keerthi, P.P.S.^1;Anoop Kumar, S.^1;Prasad, P.P.C.^1;等

关键词:Ductile materials;Ductile-mode machining;...

会议举办机构:Department of Mechanical Engineering, St. Martins Engineering College, Telengana, Hyderabad, India^1

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：7 下载：0 ]

摘要