会议论文

1 Material removal rate and machining accuracy of electrical discharge machining (EDM) of Inconel 718 using copper electrode [会议论文]

作者:Ahmad, S.^1;Chendang, R.N.^1;Supawi, A.^1;等

关键词:Difficult to machine materials;Electrical discharge machining;...

会议举办机构:Precision Machining Research Center, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：2 下载：0 ]

摘要

2 Trajectory Dependent Structural Vibration and Its Effects on Surface Generation [会议论文]

作者:Yang, Mengxiang^1;Mao, Xinyong^1;Peng, Yili^1;等

关键词:Different structure;Low-frequency vibration;...

会议举办机构:National NC System Engineering Research Centre, Huazhong University of Science and Technology, Wuhan

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：1 下载：0 ]

摘要

3 Investigation of machining parameters on corner accuracies for slant type taper triangle shaped profiles using WEDM on Hastelloy X [会议论文]

作者:Manoj, I.V.^1;Joy, R.^1;Narendranath, S.^1;等

关键词:Cutting parameters;Difficult-to-cut materials;...

会议举办机构:National Institute of Technology Karnataka, Department of Mechanical Engineering, Karnataka, India^1

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：1 下载：1 ]

摘要

4 Effect of Machining Parameters on the Surface Roughness for Different Type of Materials [会议论文]

作者:Ghazali, M.H.M.^1;Mazlan, A.Z.A.^1;Wei, L.M.^1;等

关键词:Machining parameters;Machining Process;...

会议举办机构:School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Pulau Pinang

会议时间:

预览 | 原文链接 | 全文 [ 浏览：1 下载：0 ]

摘要

5 Effect of Main Cut and Multiple Trim Cuts on Surface Integrity of 2379 Steel [会议论文]

作者:Jaafar, N.A.^1, Abdullah, A.B.^1

关键词:Electrical discharge machines;Machining conditions;...

会议举办机构:Metal Forming Research Group, School of Mechanical Engineering, Universiti Sains Malaysia (Engineeering Campus), Nibong Tebal, Penang, Malaysia^1

会议时间:

预览 | 原文链接 | 全文 [ 浏览：3 下载：1 ]

摘要

6 Effect of machining parameters on surface quality during edge trimming of multi-directional CFRP material: Taguchi method [会议论文]

作者:Sundi, S.A.^1^3;Izamshah, R.^1^2;Kasim, M.S.^1^2;等

关键词:ANOVA analysis;Carbon fiber reinforced polymer;...

会议举办机构:Precision Machining Group, Advanced Manufacturing Center, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, Durian Tunggal Melaka

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：3 下载：2 ]

摘要