会议论文

1 Modeling combined tension-shear failure of ductile materials [会议论文]

作者:Partom, Y.^1

关键词:2-D numerical simulation;Adiabatic shear band;...

会议举办机构:Retired from RAFARL, PO Box 2250, Haifa

会议时间:2014

摘要

2 A Triaxial Failure Diagram to predict the forming limit of 3D sheet metal parts subjected to multiaxial stresses [会议论文]

作者:Rastellini, F.^1,2;Socorro, G.^1;Forgas, A.^1;等

关键词:Accurate prediction;Effective plastic strain;...

会议举办机构:Quantech ATZ S.A., c/ Gran Capitan 2-4, Barceloña

会议时间:2016

预览 | 原文链接 | 全文 [ 浏览：6 下载：0 ]

摘要

3 Numerical assessment of residual formability in sheet metal products: towards design for sustainability [会议论文]

作者:Falsafi, Javad^1, Demirci, Emrah^1, Silberschmidt, Vadim.V.^1

关键词:Cold recycling;Computational schemes;...

会议举办机构:Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough

会议时间:2016

预览 | 原文链接 | 全文 [ 浏览：7 下载：1 ]

摘要

4 Comparative study of the influence of friction forces on cold forming processes in conventional ECAP die and ECAP die with low friction, by numerical simulation methods [会议论文]

作者:Dragnea, D.^1;Lixandru, P.^1;Chereches, T.^1;等

关键词:Coefficients of friction;Cold forming process;...

会议举办机构:SC UPS PILOT ARM SRL, Dragomiresti

会议时间:2016

预览 | 原文链接 | 全文 [ 浏览：12 下载：0 ]

摘要

5 Non-isothermal analysis of die corner gap formation for materials deformed by multi-pass ECAP [会议论文]

作者:Medeiros, N.^1, Moreira, L.P.^1

关键词:Effective plastic strain;Final temperatures;...

会议举办机构:Programa de Pós-graduação em Engenharia Metalúrgica, Universidade Federal Fluminense, 420 Av. dos Trabalhadores, CEP 27255-125 Volta Redonda RJ, Brazil^1

会议时间:

预览 | 原文链接 | 全文 [ 浏览：11 下载：2 ]

摘要

6 A failure model for non-proportional loading under plane stress condition based on GFLC in comparison to eMMFC and PEPS [会议论文]

作者:Hippke, H.^1, Berisha, B.^2, Hora, P.^1

关键词:Effective plastic strain;Forming limits;...

会议举办机构:Institute of Virtual Manufacturing, ETH Zurich, Tannenstrasse 3, Zurich

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：14 下载：0 ]

摘要