会议论文

1 Development of Drilling and Casing Technologies for Permafrost Areas [会议论文]

作者:Atlasov, R.^1, M., Nikolaeva, V., Karamzin

关键词:Drilling bit;Drilling operation;...

会议举办机构:North-Eastern Federal University Named after M.R. Ammosov, Institute of Oil and Gas Problems SB RAS, 58 Belinskogo, 1 Oktyabrskaya St., Yakutsk

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：2 下载：0 ]

摘要

2 New generation drilling bits [会议论文]

作者:Tretyak, A.A.^1;Balaba, V.I.^2;Popov, V.V.^1;等

关键词:Design optimization;Drilling bit;...

会议举办机构:Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya St. 132, Rostov region, Novocherkassk

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：1 下载：1 ]

摘要

3 Tribological tests of wear-resistant coatings used in the production of drill bits of horizontal and inclined drilling [会议论文]

作者:Maslov, A.L.^1;Markova, I.Yu.^1;Zakharova, E.S.^1;等

关键词:Contact areas;Crack resistance;...

会议举办机构:National University of Science and Technology MISiS, Moscow, Russia^1

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：7 下载：0 ]

摘要

4 Research on Super-long Deep Hole Drilling Technology Based on 0Cr17Ni4Cu4Nb Stainless Steel [会议论文]

作者:Han, Xiaolan^1, Liu, Zhanfeng^1

关键词:Deep hole drilling;Deep hole processing;...

会议举办机构:Mechanical Engineering College, Xian Shiyou University, Xian, China^1

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：2 下载：0 ]

摘要

5 Design and Experiment of High-speed Deep Hole Drilling for Difficult-to-Cut Materials [会议论文]

作者:Zhu, Lin^1, Dong, Zhiwei^1, Pan, Deshu^1

关键词:Cutting speed;Cutting teeth;...

会议举办机构:School of Mechanical Engineering, Xi'An Shiyou University, Shaanxi

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：5 下载：0 ]

摘要