会议论文

1 Six to Ten Digits Multiplication Fun Learning Using Puppet Prototype [会议论文]

作者:Rosli, D'Oria Islamiah^1;Ali, Azita^1;Peng, Lim Soo^1;等

关键词:Failure rate;Knowledge and experience;...

会议举办机构:Faculty of Technical and Vocational Education, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor Darul Takzim, Batu Pahat

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：1 下载：2 ]

摘要

2 Surface charging of a crater near lunar terminator [会议论文]

作者:Anuar, A.K.^1

关键词:Electron and ion densities;Low conductivity;...

会议举办机构:Department of Communication Engineering, Faculty of Electrical and Electronic Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：2 下载：1 ]

摘要

3 Forensic Assessment on Ground Instability Using Electrical Resistivity Imaging (ERI) [会议论文]

作者:Hazreek, Z.A.M.^1,2;Azhar, A.T.S.^1,2;Aziman, M.^1,2;等

关键词:Cohesive materials;Differential stiffness;...

会议举办机构:Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat Johor

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：12 下载：2 ]

摘要

4 The Effects of Biopolymers Composite Based Waste Cooking Oil and Titanium Dioxide Fillers as Superhydrophobic Coatings. [会议论文]

作者:Marsi, N.^1,2, Rus, A.Z.M.^2,3

关键词:Biopolymer composites;SEM micrographs;...

会议举办机构:Department of Mechanical Engineering Technology, Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja, Johor, Batu Pahat

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：5 下载：0 ]

摘要

5 Characterization and Mechanical Analysis of PCL/PLA composites for FDM feedstock filament [会议论文]

作者:Haq, Reazul Haq Abdul^1,2;Rahman, Mohd Nasrull Abdol^1;Ariffin, Ahmad Mubarak Tajul^3;等

关键词:Composites material;Flexural modulus;...

会议举办机构:Department of Manufacturing and Industrial Engineering, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Batu Pahat

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：6 下载：0 ]

摘要

6 Flow Characteristics Near to Stent Strut Configurations on Femoropopliteal Artery [会议论文]

作者:Paisal, Muhammad Sufyan Amir^1;Adnan, Syed Fadhil Syed^1;Taib, Ishkrizat^1;等

关键词:Computer aided designs (CAD);Different shapes;...

会议举办机构:Flow Analysis, Simulation and Turbulence Research Group, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Batu Pahat

会议时间:2017

预览 | 原文链接 | 全文 [ 浏览：11 下载：1 ]

摘要