会议论文

1 The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM) [会议论文]

作者:Nor Khairusshima, M.K.^1;Muhammad Hafiz Zakwan, B.^1;Suhaily, M.^1;等

关键词:Abrasive materials;Anisotropic material;...

会议举办机构:Department of Manufacturing and Materials Engineering, International Islamic University Malaysia (IIUM), Jalan Gombak, Kuala Lumpur

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：10 下载：1 ]

摘要

2 Tool Wear Mechanisms during Cutting of Soda Lime Glass [会议论文]

作者:Konneh, Mohamed^1;Bagum, Mst. Nasima^1;Ali, Mohammad Yeakub^1;等

关键词:Cutting parameters;High performance applications;...

会议举办机构:Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, Kuala Lumpur

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：8 下载：2 ]

摘要

3 Establishing Relationship between Process Parameters and Temperature during High Speed End Milling of Soda Lime Glass [会议论文]

作者:Bagum, Mst. Nasima^1, Konneh, Mohamed^1, Ali, Mohammad Yeakub^1

关键词:Cutting parameters;Ductile-mode machining;...

会议举办机构:Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, Kuala Lumpur

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：7 下载：1 ]

摘要

4 Chip morphology as a performance predictor during high speed end milling of soda lime glass [会议论文]

作者:Bagum, M.N.^1;Konneh, M.^1;Abdullah, K.A.^2;等

关键词:Central composite designs;Chip morphologies;...

会议举办机构:Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, Kuala Lumpur

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：4 下载：2 ]

摘要

5 The effect of cutting parameters on the performance of ZTA-MgO cutting tool [会议论文]

作者:Ali, A.M.^1;Hamidon, N.E.^1;Zaki, N.K.M.^1;等

关键词:CNC turning;Crater wear;...

会议举办机构:Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Gombak, Selangor

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：9 下载：1 ]

摘要

6 Investigation of tool engagement and cutting performance in machining a pocket [会议论文]

作者:Adesta, E.Y.T.^1;Hamidon, R.^2;Riza, M.^1;等

关键词:Cutting forces;Cutting parameters;...

会议举办机构:Department of Manufacturing and Materials Engineering, International Islamic University Malaysia (IIUM), Jalan Gombak, Kuala Lumpur

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：11 下载：0 ]

摘要