会议论文

1 Design Optimization of A Rotating Flywheel Under High Centrifugal Forces using Response Surface Method [会议论文]

作者:Fawazi, Noor^1^2;Hasrizam, C.M.^1;Hafiz, A.^1;等

关键词:Automotive clutches;Centrifugal Forces;...

会议举办机构:Intelligent Dynamic System Ikohza, Department of Mechanical Precision Engineering, Malaysian Japan International Institute of Technology, Universiti Teknologi Malaysia Kuala Lumpur, Jalan Sultan, Yahya Petra

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：2 下载：0 ]

摘要

2 Research on Moment of Inertia Measurement Method [会议论文]

作者:Wang, Yafei^1

关键词:Experiment data;Linear relationships;...

会议举办机构:Institite of Materials, CAEP, Mianyang

会议时间:2019

预览 | 原文链接 | 全文 [ 浏览：2 下载：0 ]

摘要

3 Experimental studies of adhesive joints in four-point static bending [会议论文]

作者:Jasiska, A.^1, Ligaj, B.^1, Mazurkiewicz, A.^1

关键词:Bending load;Four point bending;...

会议举办机构:UTP University of Science and Technology in Bydgoszczy, Faculty of Mechanical Engineering, al. Prof. S. Kaliskiego 7, Bydgoszcz

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：13 下载：2 ]

摘要

4 Research on geometric properties of arbitrary beam sections [会议论文]

作者:Chen, X.L.^1, Li, D.Y.^1, Zhang, L.^1

关键词:Arbitrary beams;Geometric properties;...

会议举办机构:Chongqing University of Science and Technology, Chongqing

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：12 下载：0 ]

摘要

5 Pneumatic muscle actuated rotation modules for elbow rehabilitation equipment [会议论文]

作者:Vetrice, G.^1, Deaconescu, A.^1

关键词:Design and calculation;Flexion extension;...

会议举办机构:Department of Industrial Engineering and Management, Transilvania University of Brasov, Mihai Viteazul Street, no. 5, Brasov

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：9 下载：0 ]

摘要

6 Evaluation of spinning friction from a thrust ball bearing [会议论文]

作者:Alaci, S.^1;Ciornei, F.-C.^1;Romanu, I.-C.^1;等

关键词:Angular acceleration;Axis of rotation;...

会议举办机构:Stefan Cel Mare University of Suceava, Department of Mechanics and Technologies, Universitatii Street, No. 13, Suceava

会议时间:2018

预览 | 原文链接 | 全文 [ 浏览：8 下载：1 ]

摘要