Technology-independent CMOS op amp in minimum channel length

Scalability across technologies;Minimum channel length;Constant transconductance;Source follower;Mismatch;Phase margin;Gain-bandwidth;Gain boosting;CMOS op amp

Sengupta, Susanta ; Electrical and Computer Engineering

University:Georgia Institute of Technology

Department:Electrical and Computer Engineering

关键词: Scalability across technologies;    Minimum channel length;    Constant transconductance;    Source follower;    Mismatch;    Phase margin;    Gain-bandwidth;    Gain boosting;    CMOS op amp;   

Others  :  https://smartech.gatech.edu/bitstream/1853/5101/1/sengupta_susanta_200407_phd.pdf

美国|英语

来源: SMARTech Repository

【 摘 要 】

The performance of analog integrated circuits is dependent on the technology. Digital circuits are scalable in nature, and the same circuit can be scaled from one technology to another with improved performance. But, in analog integrated circuits, the circuit components must be re-designed to maintain the desired performance across different technologies. Moreover, in the case of digital circuits, minimum feature-size (short channel length) devices can be used for better performance, but analog circuits are still being designed using channel lengths larger than the minimum feature sizes.The research in this thesis is aimed at understanding the impact of technology scaling and short channel length devices on the performance of analog integrated circuits. The operational amplifier (op amp) is chosen as an example circuit for investigation. The performance of the conventional op amps are studied across different technologies for short channel lengths, and techniques to develop technology-independent op amp architectures have been proposed. In this research, three op amp architectures have been developed whose performance is relatively independent of the technology and the channel length. They are made scalable, and the same op amp circuits are scaled from a 0.25 um CMOS onto a 0.18 um CMOS technology with the same components. They are designed to achieve large small-signal gain, constant unity gain-bandwidth frequency and constant phase margin. They are also designed with short channel length transistors. Current feedback, gm-boosted, CMOS source followers are also developed, and they are used in the buffered versions of these op amps.