Modeling the effects of shot-peened residual stresses and inclusions on microstructure-sensitive fatigue of Ni-base superalloy components

Fatigue;Micro-structure sensitive;Ni-based superalloy;IN100;Residual stresses;Inclusions

Musinski, William D. ; McDowell, David L. Mechanical Engineering Neu, Richard W. Pierron, Olivier N. Gall, Ken Rimoli, Julian J. Golden, Patrick J. ; McDowell, David L.

University:Georgia Institute of Technology

Department:Mechanical Engineering

关键词: Fatigue;    Micro-structure sensitive;    Ni-based superalloy;    IN100;    Residual stresses;    Inclusions;   

Others  :  https://smartech.gatech.edu/bitstream/1853/52337/1/MUSINSKI-DISSERTATION-2014.pdf

美国|英语

来源: SMARTech Repository

【 摘 要 】

The simulation and design of advanced materials for fatigue resistance requires an understanding of the response of their hierarchical microstructure attributes to imposed load, temperature, and environment over time. For Ni-base superalloy components used in aircraft jet turbine engines, different competing mechanisms (ex. surface vs. subsurface, crystallographic vs. inclusion crack formation, transgranular vs. intergranular propagation) are present depending on applied load, temperature, and environment. Typically, the life-limiting features causing failure in Ni-base superalloy components are near surface inclusions. Compressive surface residual stresses are often introduced in Ni-base superalloy components to help retard fatigue crack initiation and early growth at near surface inclusions and shift the fatigue crack initiation sites from surface to sub-surface locations, thereby increasing fatigue life. To model the effects of residual stresses, inclusions, and microstructure heterogeneity on fatigue crack driving force and fatigue scatter, a computational crystal plasticity framework is presented that imposes quasi-thermal eigenstrain to induce near surface residual stresses in polycrystalline Ni-base superalloy IN100 smooth specimens with and without nonmetallic inclusions. In addition, the effect of near surface inclusions in notched Ni-base superalloy components on MSC growth and fatigue life scatter was investigated in this work. A fatigue indicator parameter (FIP)-based microstructurally small crack (MSC) growth model incorporating crack tip/grain boundary effects was introduced and fit to experiments (in both laboratory air and vacuum) for the case of 1D crack growth and then computationally applied to 3D crack growth starting (1) from a focused ion beam (FIB) notch in a smooth specimen, (2) from a debonded inclusion located at different depths within notched components containing different notch root radii, and (3) from inclusions located at different depths relative to the surface in smooth specimens containing simulated shot peened induced residual stresses. Computational predictions in MSC growth rate scatter and distribution of fatigue life were in general accordance with experiments.The general approach presented in this Dissertation can be used to advance integrated computational materials engineering (ICME) by predicting variation of fatigue resistance and minimum life as a function of heat treatment/microstructure and surface treatments for a given alloy system and providing support for design of materials for enhanced fatigue resistance. In addition, this framework can reduce the number of experiments required to support modification of material to enhance fatigue resistance, which can lead to accelerated insertion (from design conception to production parts) of new or improved materials for specific design applications. Elements of the framework being advanced in this research can be applied to any engineering alloy.