Battery-sourced switched-inductor multiple-output CMOS power-supply systems

Switching converter;Hysteretic;Multiple output;Stability;Single-inductor multiple-output;Cross-regulation

Solis, Carlos J. ; Rincon-Mora, Gabriel A. Electrical and Computer Engineering Ghovanloo, Maysam Habetler, Thomas G. Cressler, John D. Kang, Sung Ha ; Rincon-Mora, Gabriel A.

University:Georgia Institute of Technology

Department:Electrical and Computer Engineering

关键词: Switching converter;    Hysteretic;    Multiple output;    Stability;    Single-inductor multiple-output;    Cross-regulation;   

Others  :  https://smartech.gatech.edu/bitstream/1853/59924/1/SOLIS-DISSERTATION-2018.pdf

美国|英语

来源: SMARTech Repository

【 摘 要 】

Wireless microsystems add intelligence to larger systems by sensing, processing and transmitting information which can ultimately save energy and resources. Each function has their own power profile and supply level to maximize performance and save energy since they are powered by a small battery. Also, due to its small size, the battery has limited energy and therefore the power-supply system cannot consume much power. Switched-inductor converters are efficient across wide operating conditions but one fundamental challenge is integration because miniaturized dc-dc converters cannot afford to accommodate more than one off-chip power inductor. The objective of this research is to explore, develop, analyze, prototype, test, and evaluate how one switched inductor can derive power from a small battery to supply, regulate, and respond to several independent outputs reliably and accurately. Managing and stabilizing the feedback loops that supply several outputs at different voltages under diverse and dynamic loading conditions with one CMOS chip and one inductor is also challenging. Plus, since a single inductor cannot supply all outputs at once, steady-state ripples and load dumps produce cross-regulation effects that are difficult to manage and suppress. Additionally, as the battery depletes the power-supply system must be able to regulate both buck and boost voltages. The presented system can efficiently generate buck and boost voltages with the fastest response time while having a low silicon area consumption per output in a low-cost technology which can reduce the overall size and cost of the system.