Two-stage network design in humanitarian logistics.

Humanitarian logistics;Facility location;Pre-positioning problem;Emergency response;Lagrangian Heuristic

Seyed Soroush Moeini

University:University of Louisville

Department:Industrial Engineering

关键词: Humanitarian logistics;    Facility location;    Pre-positioning problem;    Emergency response;    Lagrangian Heuristic;   

Others  :  https://ir.library.louisville.edu/cgi/viewcontent.cgi?article=1992&context=etd

美国|英语

来源: The Universite of Louisville's Institutional Repository

【 摘 要 】

Natural disasters such as floods and earthquakes can cause multiple deaths, injuries, and severe damage to properties. In order to minimize the impact of such disasters, emergency response plans should be developed well in advance of such events. Moreover, because different organizations such as non-governmental organizations (NGOs), governments, and militaries are involved in emergency response, the development of a coordination scheme is necessary to efficiently organize all the activities and minimize the impact of disasters. The logistics network design component of emergency management includes determining where to store emergency relief materials, the corresponding quantities and distribution to the affected areas in a cost effective and timely manner. In a two-echelon humanitarian relief chain, relief materials are pre-positioned first in regional rescue centers (RRCs), supply sources, or they are donated to centers. These materials are then shipped to local rescue centers (LRCs) that distribute these materials locally. Finally, different relief materials will be delivered to demand points (also called affected areas or AAs). Before the occurrence of a disaster, exact data pertaining to the origin of demand, amount of demand at these points, availability of routes, availability of LRCs, percentage of usable pre-positioned material, and others are not available. Hence, in order to make a location-allocation model for pre-positioning relief material, we can estimate data based on prior events and consequently develop a stochastic model. The outputs of this model are the location and the amount of pre-positioned material at each RRC as well as the distribution of relief materials through LRCs to demand points. Once the disaster occurs, actual values of the parameters we seek (e.g., demand) will be available. Also, other supply sources such as donation centers and vendors can be taken into account. Hence, using updated data, a new location-allocation plan should be developed and used. It should be mentioned that in the aftermath of the disaster, new parameters such as reliability of routes, ransack probability of routes and priority of singular demand points will be accessible. Therefore, the related model will have multiple objectives. In this dissertation, we first develop a comprehensive pre-positioning model that minimizes the total cost while considering a time limit for deliveries. The model incorporates shortage, transportation, and holding costs. It also considers limited capacities for each RRC and LRC. Moreover, it has the availability of direct shipments (i.e., shipments can be done from RRCs directly to AAs) and also has service quality.