Architecture and CAD for carbon nanomaterial integrated circuits

Carbon Nanotubes;Graphene Nanoribbons;Carbon Nanomaterial Transistors;Nanoelectronic Architectures;Field programmable carbon nanotube array (FPCNA);Variation-Aware CAD;Discretized statistical static timing analysis (SSTA)

Chilstedt, Scott E. ; Chen ; Deming

关键词: Carbon Nanotubes;    Graphene Nanoribbons;    Carbon Nanomaterial Transistors;    Nanoelectronic Architectures;    Field programmable carbon nanotube array (FPCNA);    Variation-Aware CAD;    Discretized statistical static timing analysis (SSTA);   

Others  :  https://www.ideals.illinois.edu/bitstream/handle/2142/15969/Chilstedt_Scott.pdf?sequence=2&isAllowed=y

美国|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

The ITRS (International Technology Roadmap for Semiconductors) has recommended that carbon-based transistors be given further study as a potential “Beyond CMOS” technology. Unlike traditional devices with a silicon channel, these transistors have channels made from semiconducting carbon nanomaterials in the form of carbon nanotubes (CNTs) and graphene nanoribbons (GNRs). The research community has given specific attention to these two carbon allotropes because of their outstanding electrical properties, including high mobilities at room temperature, high current densities, and micron-scale mean free paths. Carbon nanomaterial transistors offer many opportunities for circuits and systems, but also present a number of challenges in terms of fabrication, architecture design, and CAD integration. In order to be useful to the semiconductor industry, transistors must be connected together to form higher order circuits. Due to the increased variation and defects in nanometer-scale fabrication, and the regular nature of bottom-up self-assembly, field programmable devices are a promising initial application for such technologies. This thesis details the design and evaluation of a carbon nanomaterial based architecture called FPCNA (field programmable carbon nanotube array). Nanomaterial based devices and circuit building blocks are developed and characterized, including a lookup table created entirely from continuous CNT arrays. To determine the performance of these building blocks, variation-aware physical design tools are used, with statistical timing analysis that can handle both Gaussian and non-Gaussian random variables. When the FPCNA architecture is evaluated using this CAD flow, a 2.75× performance improvement is seen over an equivalent CMOS FPGA at a 95% yield. In addition, FPCNA offers a 5.07× footprint reduction compared to the baseline FPGA.