Oil Retention and Pressure Drop in Horizontal and Vertical Suction Lines with R410A / POE ISO 32

Oil retention;Oil return;Suction line;Measurement

Zoellick, Kurt F. ; Hrnjak ; Predrag S.

关键词: Oil retention;    Oil return;    Suction line;    Measurement;   

Others  :  https://www.ideals.illinois.edu/bitstream/handle/2142/16974/Zoellick_Kurt.pdf?sequence=1&isAllowed=y

美国|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

In refrigeration systems a small amount of compressor lubricant is entrained in the refrigerant and circulated through the system, where some is retained in each component.The suction line to the compressor has the largest potential for oil retention.This paper presents results from an experimental apparatus that has been constructed to circulate POE (polyolester) oil and R410A at a controlled mass flux, OCR (oil in circulation ratio), and apparent superheat, and to directly measure the pressure drop and mass of oil retained in horizontal and vertical suction lines.The bulk vapor velocity and overall void fraction are determined from direct mass and temperature measurements.The oil retention, pressure drop, and flow regimes near the minimum ASHRAE recommended mass flux condition are explored.It was found that oil retention begins to increase sharply even above the minimum recommended flux, so conditions near the minimum should be avoided.Two relationships were developed to predict the oil retention in the vertical and horizontal suction lines.The average error from the predictions method was 10.9% for the vertical tube, and 7.9% for the horizontal tube.