Interference lithography for optical devices and coatings

Interference Lithography;nanocomposites;photopolymerization;photonic crystal;nanoparticle assembly;holography

Juhl, Abigail T.

关键词: Interference Lithography;    nanocomposites;    photopolymerization;    photonic crystal;    nanoparticle assembly;    holography;   

Others  :  https://www.ideals.illinois.edu/bitstream/handle/2142/18538/Juhl_Abigail.pdf?sequence=1&isAllowed=y

美国|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

Interference lithography can create large-area, defect-free nanostructures with unique optical properties.In this thesis, interference lithography will be utilized to create photonic crystals for functional devices or coatings. For instance, typical lithographic processing techniques were used to create 1, 2 and 3 dimensional photonic crystals in SU8 photoresist. These structures were in-filled with birefringent liquid crystal to make active devices, and the orientation of the liquid crystal directors within the SU8 matrix was studied.Most of this thesis will be focused on utilizing polymerization induced phase separation as a single-step method for fabrication by interference lithography.For example, layered polymer/nanoparticle composites have been created through the one-step two-beam interference lithographic exposure of a dispersion of 25 and 50 nm silica particles within a photopolymerizable mixture at a wavelength of 532 nm. In the areas of constructive interference, the monomer begins to polymerize via a free-radical process and concurrently the nanoparticles move into the regions of destructive interference.The holographic exposure of the particles within the monomer resin offers a single-step method to anisotropically structure the nanoconstituents within a composite.A one-step holographic exposure was also used to fabricate self- healing coatings that use water from the environment to catalyze polymerization.Polymerization induced phase separation was used to sequester an isocyanate monomer within an acrylate matrix.Due to the periodic modulation of the index of refraction between the monomer and polymer, the coating can reflect a desired wavelength, allowing for tunable coloration.When the coating is scratched, polymerization of the liquid isocyanate is catalyzed by moisture in air; if the indices of the two polymers are matched, the coatings turn transparent after healing.Interference lithography offers a method of creating multifunctional self-healing coatings that readout when damage has occurred.