Geometric control and motion planning for three-dimensional bipedal locomotion

Robots;Bipedal;Walking;Locomotion;Dynamic Walking;Geometric Control;Motion Planning;Three-Dimensional (3D);Reduction-based Control;Controlled Reduction;Hybrid Limit Cycles

Gregg, Robert D., IV

关键词: Robots;    Bipedal;    Walking;    Locomotion;    Dynamic Walking;    Geometric Control;    Motion Planning;    Three-Dimensional (3D);    Reduction-based Control;    Controlled Reduction;    Hybrid Limit Cycles;   

Others  :  https://www.ideals.illinois.edu/bitstream/handle/2142/18397/Gregg_Robert.pdf?sequence=1&isAllowed=y

美国|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

This thesis presents a hierarchical geometric control approach for fast and energetically efficient bipedal dynamic walking in three-dimensional (3-D) space to enable motion planning applications that have previously been limited to inefficient quasi-static walkers. In order to produce exponentially stable hybrid limit cycles, we exploit system energetics, symmetry, and passivity through the energy-shaping method of controlled geometric reduction. This decouples a subsystem corresponding to a lower-dimensional robot through a passivity-based feedback transformation of the system Lagrangian into a special form of controlled Lagrangian with broken symmetry, which corresponds to an equivalent closed-loop Hamiltonian system with upper-triangular form. The first control term reduces to mechanically-realizable passive feedback that establishes a functional momentum conservation law that controls the "divided" cyclic variables to set-points or periodic orbits. We then prove extensive symmetries in the class of open kinematic chains to present the multistage application of controlled reduction. A reduction-based control law is derived to construct straight-ahead and turning gaits for a 4-DOF and 5-DOF hipped biped in 3-D space, based on the existence of stable hybrid limit cycles in the sagittal plane-of-motion. Given such a set of asymptotically stable gait primitives, a dynamic walker can be controlled as a discrete-time switched system that sequentially composes gait primitives from step to step. We derive "funneling" rules by which a walking path that is a sequence of these gaits may be stably followed by the robot. The primitive set generates a tree exploring the action space for feasible walking paths, where each primitive corresponds to walking along a nominal arc of constant curvature. Therefore, dynamically stable motion planning for dynamic walkers reduces to a discrete search problem, which we demonstrate for 3-D compass-gait bipeds. After reflecting on several connections to human biomechanics, we propose extensions of this energy-shaping control paradigm to robot-assisted locomotor rehabilitation. This work aims to offer a systematic design methodology for assistive control strategies that are amenable to sequential composition for novel progressive training therapies.