Energy-Optimal Control of Over-Actuated Systems - with Application to a Hybrid Feed Drive

over-actuated system;control allocation;hybrid feed drive;Mechanical Engineering;Engineering;Mechanical Engineering

Duan, MolongUlsoy, A Galip ;

University of Michigan

关键词: over-actuated system;    control allocation;    hybrid feed drive;    Mechanical Engineering;    Engineering;    Mechanical Engineering;   

Others  :  https://deepblue.lib.umich.edu/bitstream/handle/2027.42/146104/molong_1.pdf?sequence=1&isAllowed=n

瑞士|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

Over-actuated (or input-redundant) systems are characterized by the use of more actuators than the degrees of freedom to be controlled. They are widely used in modern mechanical systems to satisfy various control requirements, such as precision, motion range, fault tolerance, and energy efficiency. This thesis is particularly motivated by an over-actuated hybrid feed drive (HFD) which combines two complementary actuators with the aim to reduce energy consumption without sacrificing positioning accuracy in precision manufacturing.This work addresses the control challenges in achieving energy optimality without sacrificing control performance in so-called weakly input-redundant systems, which characterize the HFD and most other over-actuated systems used in practice. Using calculus of variations, an optimal control ratio/subspace is derived to specify the optimal relationship among the redundant actuators irrespective of external disturbances, leading to a new technique termed optimal control subspace-based (OCS) control allocation. It is shown that the optimal control ratio/subspace is non-causal; accordingly, a causal approximation is proposed and employed in energy-efficient structured controller design for the HFD. Moreover, the concept of control proxy is proposed as an accurate causal measurement of the deviation from the optimal control ratio/subspace. The proxy enables control allocation for weakly redundant systems to be converted into regulation problems, which can be tackled using standard controller design methodologies. Compared to an existing allocation technique, proxy-based control allocation is shown to dynamically allocate control efforts optimally without sacrificing control performance.The relationship between the proposed OCS control allocation and the traditional linear quadratic control approach is discussed for weakly input redundant systems. The two approaches are shown to be equivalent given perfect knowledge of disturbances; however, the OCS control allocation approach is shown to be more desirable for practical applications like the HFD, where disturbances are typically unknown. The OCS control allocation approach is validated in simulations and machining experiments on the HFD; significant reductions in control energy without sacrificing positioning accuracy are achieved.