Multidisciplinary Optimization Approach for Design and Operation of Constrained and Complex-shaped Space Systems.

Smallsat;Multidisciplinary Design Optimization;Model Predictive Control;CubeSat;Space System Design and Operation;Aerospace Engineering;Engineering;Aerospace Engineering

Lee, Dae YoungKolmanovsky, Ilya Vladimir ;

University of Michigan

关键词: Smallsat;    Multidisciplinary Design Optimization;    Model Predictive Control;    CubeSat;    Space System Design and Operation;    Aerospace Engineering;    Engineering;    Aerospace Engineering;   

Others  :  https://deepblue.lib.umich.edu/bitstream/handle/2027.42/120694/daylee_1.pdf?sequence=1&isAllowed=y

瑞士|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

The design of a small satellite is challenging since they are constrained by mass, volume, and power. To mitigate these constraint effects, designers adopt deployable configurations on the spacecraft that result in an interesting and difficult optimization problem. The resulting optimization problem is challenging due to the computational complexity caused by the large number of design variables and the model complexity created by the deployables. Adding to these complexities, there is a lack of integration of the design optimization systems into operational optimization, and the utility maximization of spacecraft in orbit. The developed methodology enables satellite Multidisciplinary Design Optimization (MDO) that is extendable to on-orbit operation.Optimization of on-orbit operations is possible with MDO since the model predictive controller developed in this dissertation guarantees the achievement of the on-ground design behavior in orbit. To enable the design optimization of highly constrained and complex-shaped space systems, the spherical coordinate analysis technique, called the ``Attitude Sphere;;;;, is extended and merged with an additional engineering tools like OpenGL. OpenGL;;s graphic acceleration facilitates the accurate estimation of the shadow-degraded photovoltaic cell area. This technique is applied to the design optimization of the satellite Electric Power System (EPS) and the design result shows that the amount of photovoltaic power generation can be increased more than 9%. Based on this initial methodology, the goal of this effort is extended from Single Discipline Optimization to Multidisciplinary Optimization, which includes the design and also operation of the EPS, Attitude Determination and Control System (ADCS), and communication system. The geometry optimization satisfies the conditions of the ground development phase; however, the operation optimization may not be as successful as expected in orbit due to disturbances. To address this issue, for the ADCS operations, controllers based on Model Predictive Control that are effective for constraint handling were developed and implemented. All the suggested design and operation methodologies are applied to a mission ;;CADRE”, which is space weather mission scheduled for operation in 2016.This application demonstrates the usefulness and capability of the methodology to enhance CADRE;;s capabilities, and its ability to be applied to a variety of missions.