Energy-efficient Multifunctional Sensors based on Semiconductor Devices.

Organic light emitting devices;Dye sensitized solar cells;Chemiluminescence;Ion sensors;Touch sensor;Semiconductors;Electrical Engineering;Materials Science and Engineering;Engineering;Materials Science and Engineering

Agrawal, Kanika L.Kim, Jinsang ;

University of Michigan

关键词: Organic light emitting devices;    Dye sensitized solar cells;    Chemiluminescence;    Ion sensors;    Touch sensor;    Semiconductors;    Electrical Engineering;    Materials Science and Engineering;    Engineering;    Materials Science and Engineering;   

Others  :  https://deepblue.lib.umich.edu/bitstream/handle/2027.42/113321/kanika_1.pdf?sequence=1&isAllowed=y

瑞士|英语

来源: The Illinois Digital Environment for Access to Learning and Scholarship

【 摘 要 】

The growing potential of telemedicine and on-body health monitoring has led to the emergence of a new set of challenges associated with chemical, biological and other kinds of sensors that may be needed to facilitate integration with wearable devices. This thesis is aimed at addressing some of these challenges via the use of novel semiconductor device architectures in ways that facilitate significant advances in energy efficiency, miniaturization and cost effectiveness of traditional sensing techniques.For displays, organic light emitting devices (OLED) offer several unprecedented advantages over conventional displays, including flexibility, compactness, and superior power efficiency. However, the touch sensing capability in such devices is usually provided by capacitive or resistive sensors overlaid on the main display that increase bulkiness. Integration of touch sensing with the imaging plane of the display could dramatically reduce thickness, improve reliability, and enhance sensing resolution. This thesis reports a novel physical effect in OLEDs that could allow touch sensing to be performed by the image-forming pixel itself. In addition to studying the fundamental physical mechanism by which this sensing proceeds, an efficient single pixel OLED that generates changes in electrical current upon touch is discussed. Another new challenge in wearable electronics is limited on-board power, due to growing power requirements to support a larger number of functions, and a relatively low energy density of batteries. At the same time, a considerable amount of research in recent years has been dedicated to developing novel biochemical sensors that can be integrated with wearables. To address these two emerging challenges, a modified dye-sensitized solar cell is designed to detect common contaminants in drinking water (e.g. metal ions), while powering its own operation by converting absorbed ambient light into an electrical signal. Finally, a simple, cost-effective chemiluminescence detection scheme is that is applicable to a wide variety of substances, ranging from environmental contaminants to biomarkers, is demonstrated. We expect that further improvements in the optical collection efficiency of the reaction chamber will result in detection limits in the single nanomolar regime, potentially unlocking a broad range of field and point-of-care diagnostic applications.