Superstructure Optimization of Multiple Cyclone Arrangements Using Mixed Integer Nonlinear Programming

Superstructure Optimization;nonlinear programming;mixed integer nonlinear programming;1D3D cyclone;2D2D cyclone;1D2D cyclone;parallel cyclone arrangement;series cyclone arrangement;parallel-series cyclone arrangement;multiple cyclone arrangements;GAMS;Chemical Engineering

Failaka, Muhamad Fariz

University of Waterloo

关键词: Superstructure Optimization;    nonlinear programming;    mixed integer nonlinear programming;    1D3D cyclone;    2D2D cyclone;    1D2D cyclone;    parallel cyclone arrangement;    series cyclone arrangement;    parallel-series cyclone arrangement;    multiple cyclone arrangements;    GAMS;    Chemical Engineering;   

Others  :  https://uwspace.uwaterloo.ca/bitstream/10012/9541/1/Failaka_Muhamad_Fariz.pdf

瑞士|英语

来源: UWSPACE Waterloo Institutional Repository

【 摘 要 】

The gas-solid cyclone has been remarkably widely used among all types of industrialgas-cleaning devices. Many studies have been conducted and reported excessive experimental, theoretical, and computational research aimed at understanding and predicting the performance of cyclones. However, the majority of these works have only focused on the development of single cyclones. In the meantime, the use of multiple cyclones can be considered as one solution to the demands of obtaining the best pollution control strategies to achieve a minimum level of pollution reduction. This has motivated the development of effective formulation for the cyclone arrangement problem. In this work a new optimization model of multiple cyclone arrangement is presented. The key idea is to present the capability of General Algebraic Modeling System (GAMS) software in obtaining the optimal number and dimensions of the cyclone, and the best cyclone arrangement for a certain condition with respect to the minimum total cost, including the operating cost and the capital cost.The proposed model of nonlinear programming (NLP) and mixed integer nonlinearprogramming (MINLP) has been successfully applied to different case studies. The NLPmodel is applied to an NPK (Nitrogen, Phosphorus, and Potassium) fertilizer plant to findthe optimal number and dimensions of the 1D3D, 2D2D, and 1D2D cyclones arrangedeither in parallel or series. In another case study with the total flow rate of 165 m3/s of astream to be processed in a paper mill, the best cyclone arrangement of parallel-series for three different combinations of the 1D3D and 2D2D cyclone is obtained through the use of MINLP modeling. The results show that different types of cyclones, applied in NPKfertilizer plant, result in different optimal numbers of cyclones. Each type of cyclone (i.e.,1D3D, 2D2D, and 1D2D) has an alternative that can be arranged either in parallel or inseries configuration. Furthermore, different values used for the upper bound of D and Nin the proposed MINLP model, result in a different cyclone arrangement of parallel-series selected as the optimal solution. The cyclone of 2D2D+2D2D arranged in parallel-series is found to be more economical and efficient compared to other arrangements.