Laser Safety Inspection Criteria.

Barat, K.

Technical Information Center Oak Ridge Tennessee

关键词: Lasers;    Safety;    Inspection;    Safety measures;    Compliance;   

RP-ID  :  DE200515011552

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, 'The LSO shall be responsible for hazards evaluation of laser work areas'; (2) Section 1.3.2.8, Safety Features Audits, 'The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation'; and (3) Appendix D, under Survey and Inspections, it states, 'the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used'. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items.