Development and Manufacture of Cost Effective Composite Drill Pipe. Annual Technical Progress Report, 2001.

Technical Information Center Oak Ridge Tennessee

关键词: Drill pipes;    Composite materials;    Manufacturing;    Specifications;    Drilling equipment;   

RP-ID  :  DE2004831119

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

This technical report presents the engineering research and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report discusses and illustrates all progress in the first two years of this NETL/DOE supported program. The following have been accomplished and are reported in detail herein: (1) Specifications for both 5 5/16 inch and 3 3/8 inch composite drill pipe have been finalized. (2) All basic laboratory testing has been completed and has provide sufficient data for the selection of materials for the composite tubing, adhesives, and abrasion coatings. (3) Successful demonstration of composite/metal joint interfacial connection. (4) Upgrade of facilities to provide a functional pilot plant manufacturing facility. (5) Arrangements to have the 3 3/8 inch CDP used in a drilling operation early in C.Y. 2002. (6) Arrangements to have the 5 5/16 inch CDP marketed and produced by a major drill pipe manufacturer.