Synthesis and Characterization of CO-and H2S-Tolerant Electrocatalysts for PEM Fuel Cell. (Semi-Annual Technical Report, April 1, 2005-September 30, 2005).

Ilias, S.

Technical Information Center Oak Ridge Tennessee

关键词: Fuel cells;    Electrocatalysts;    Anodes;    Electrodes;    Carbon;   

RP-ID  :  DE2006862410

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

The present state-of-art Proton Exchange Membrane Fuel Cell (PEMFC) technology is based on platinum (Pt) as a catalyst for both the fuel (anode) and air (cathode) electrodes. This catalyst is highly active but susceptible to poisoning by CO, which may be present in the H(sub 2)-fuel used or may be introduced during the fuel processing. Presence of trace amount of CO and H(sub 2)S in the H(sub 2)-fuel poisons the anode irreversibly and decreases the performance of the PEMFCs. In an effort to reduce the Pt-loading and improve the PEMFC performance, we propose to synthesize a number of Pt-based binary, ternary, and quaternary electrocatalysts using Ru, Mo, Ir, Ni, and Co as a substitute for Pt. By fine-tuning the metal loadings and compositions of candidate electrocatalysts, we plan to minimize the cost and optimize the catalyst activity and performance in PEMFC. The feasibility of the novel electrocatalysts will be demonstrated in the proposed effort with gas phase CO and H(sub 2)S concentrations typical of those found in reformed fuel gas with coal/natural gas/methanol feedstocks.