Effect of Surface Contamination on Adhesive Forces as Measured by Contact Mechanics.

Emerson, ; Giunta, ; Miller, ; Sorensen, ; Pearson,

Technical Information Center Oak Ridge Tennessee

关键词: Adhesives;    Aluminium;    Elastomers;    Hexadecane;    Aluminium oxides;   

RP-ID  :  DE2001772160

学科分类：工程和技术（综合）

美国|英语

来源: National Technical Reports Library

【 摘 要 】

The contact adhesive forces between two surfaces, one being a soft hemisphere and the other being a hard plate, can readily be determined by applying an external compressive load to mate the two surfaces and subsequently applying a tensile load to peel the surfaces apart. The contact region is assumed the superposition of elastic Hertzian pressure and of the attractive surface forces that act only over the contact area. What are the effects of the degree of surface contamination on adhesive forces. Clean aluminum surfaces were coated with hexadecane as a controlled contaminant. The force required to pull an elastomeric hemisphere from a surface was determined by contact mechanics, via the JKR model, using a model siloxane network for the elastomeric contact sphere. Due to the dispersive nature of the elastomer surface, larger forces were required to pull the sphere from a contaminated surface than a clean aluminum oxide surface.