Fabrication of Phononic-Isolated Kinetic Inductance Detectors

Denis, Kevin L ; Maasilta, Ilari ; Puurtinen, Tuomas ; Rostem, Karwan ; de Visser, Pieter ; Williams, Elissa H ; Wollack, Edward J

关键词: FABRICATION;    PHONONS;    PHOTONS;    DETECTORS;    INDUCTANCE;    ELECTRON BEAMS;    PHOTOMICROGRAPHY;    LITHOGRAPHY;   

RP-ID  :  GSFC-E-DAA-TN70849

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

Kinetic inductance detectors (KID) have received increased interest due to their relative ease of fabrication, low noise, and scalability to large format arrays required by next generation of astronomical telescopes. The development of KIDs has progressed rapidly, with very low noise equivalent power demonstrated by several groups and KIDs arrays implemented in several ground-based and air-borne instruments. In this paper, we describe a new fabrication process which consists of a membrane isolated KID incorporating a phononic bandgap structure tuned to block recombination phonons from escaping to the thermal bath. This architecture is designed to increase the quasi-particle lifetime and results in increased responsivity to signal photons and lower noise. These devices have been fabricated as lumped-element resonators with hafnium inductors and Nb capacitors on low stress silicon nitride and silicon-on-insulator membranes. We discuss the fabrication process, which uses a combination of sub-micron laser based direct write lithography and nanoscale electron beam lithography.