Bend-Test Results of the MISSE 7 Flexural Stress Effects Experiment After 1.5 Years of Space Exposure

Snow, Kate E ; de Groh, Kim K ; Banks, Bruce A ; Sechkar, Edward A

关键词: AEROSPACE ENVIRONMENTS;    BEND TESTS;    BORON ISOTOPES;    CHARGED PARTICLES;    CREEP PROPERTIES;    DEGRADATION;    EMBRITTLEMENT;    KAPTON (TRADEMARK);    RADIATION EFFECTS;    SOLAR RADIATION;    SPACECRAFT CONSTRUCTION MATERIALS;    STRUCTURAL FAILURE;    THERMAL CYCLING TESTS;    WAKES;   

RP-ID  :  NASA/TM-2019-220035,GRC-E-DAA-TN62672

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

Low Earth orbital environmental exposure can cause degradation of exterior spacecraft materials. Radiation and thermal exposure often result in bond-breaking and embrittlement of polymers, reducing mechanical strength and structural integrity. The Flexural Stress Effects Experiment (FSEE) was flown with the objective of determining the role of space exposure on the degradation of polymers under flexural stress. The FSEE samples were flown in a wake orientation on the exterior of International Space Station for 1.5 years. Twenty-three polyimide and fluorinated polymers with various coatings were flown: 11 bent over a 0.375-inch diameter holder and 12 over a 0.25-inch diameter holder. A non-standard bend-test procedure was used to determine the surface strain at which embrittled polymers crack. None of the control samples cracked, even under surface strains up to 19.7%, although one coating cracked. Of the 10 flight samples tested, seven indicated increased embrittlement through bend-test cracking at surface strains from 0.65% to 8.11%. Therefore, most of the tested polymers were embrittled due to space exposure, when compared to their control samples. The samples flown over the 0.375-inch holder were more embrittled than those on the 0.25-inch holder. Determination of the extent of space induced embrittlement of polymers is important for designing durable spacecraft.