Rapid Development of the Seeker Free-Flying Inspector Guidance, Navigation, and Control System

Sullivan, Jacob ; Gambone, Elisabeth ; Kirven, Thomas ; Pedrotty, Samuel ; Wood, Brandon

关键词: CUBESATS;    NAVIGATION INSTRUMENTS;    CONTROL SYSTEMS DESIGN;    GUIDANCE (MOTION);    COMPUTER PROGRAMS;    FLIGHT CONTROL;    APPLICATIONS PROGRAMS (COMPUTERS);    COVARIANCE;    ALGORITHMS;    PERFORMANCE PREDICTION;    INTERNATIONAL SPACE STATION;    SPACE PROGRAMS;   

RP-ID  :  AAS 19-065,JSC-E-DAA-TN64897

学科分类：航空航天科学

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

Seeker is an automated extravehicular free-flying inspector CubeSat designed and built in-house at the Johnson Space Center (JSC). As a Class 1E project funded by the International Space Station (ISS) Program, Seeker had a streamlined process to flight certification, but the vehicle had to be designed, developed, tested, and delivered within approximately one year after authority to pro-ceed (ATP) and within a $1.8 million budget. These constraints necessitated an expedited Guidance, Navigation, and Control (GNC) development schedule, development began with a navigation sensor trade study using Linear Covariance (LinCov) analysis and a rapid sensor downselection process, resulting in the use of commercial off-the-shelf (COTS) sensors which could be procured quickly and subjected to in-house environmental testing to qualify them for flight. A neural network was used to enable a COTS camera to provide bearing measurements for visual navigation. The GNC flight software (FSW) algorithms utilized lean development practices and leveraged the Core Flight Software (CFS) architecture to rapidly develop the GNC system, tune the system parameters, and verify performance in simulation. This pace was anchored by several Hardware-Software Integration (HSI) milestones, which forced the Seeker GNC team to develop the interfaces both between hardware and software and between the GNC domains early in the project and to enable a timely delivery.