Bit Error Rate Performance of a Free Space Optical Link Using Double Clad Fibers

Sullivan, Joseph ; Schoenholz, Bryan ; Tedder, Sarah

关键词: ALIGNMENT;    BIT ERROR RATE;    CLADDING;    DUPLEXERS;    FIBER OPTICS;    FORM FACTORS;    FREE-SPACE OPTICAL COMMUNICATION;    OPTICAL FIBERS;    OPTICAL PATHS;    SYMMETRY;    TRANSMITTER RECEIVERS;    VIABILITY;   

RP-ID  :  GRC-E-DAA-TN64998

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

Mobile and embedded applications are emerging in the growing field of free space optical links (FSOL). Some mobile applications for FSOL include spacecraft, aircraft, and automotive. These applications by nature require low size weight and power (SWaP) solutions. The main challenge with any FSOL system is the strict pointing requirements. Common solutions to pointing and alignment of FSOL include gimbals, fast steering mirrors, and adaptive optics. All of which provide viable solutions at the cost of increased SWaP. Previously, we presented the use of both large core fibers and double clad fibers (DCF) to interface FSOL transmit and receive optics with small form factor pluggable optical transceivers (SFP). Double clad fibers have been shown to enable a common optical path by transmitting through a single mode core and receiving through a large inner cladding. This enables a single set of symmetric transmit and receive optics, which decreases the SWaP. In addition, using DCF increases the received power stability of the link relative to a multi-mode fiber (MMF) transmitting. To determine the viability of the system, bit error rate performance needs to be investigated. The results of this paper show that at a bit rate of 10 Gbps, double clad fibers offer similar bit error rate performance to single mode fibers when transmitting and multi-mode fibers when receiving enabling a symmetric duplex FSOL reducing SWaP.