Tribological Performance of PM400 Bushings in Oscillatory Sliding from 25 to 927 °C

DellaCorte, Christopher ; Manco, Richard A, II ; Martin, Robert A

关键词: SOLID LUBRICANTS;    HIGH TEMPERATURE LUBRICANTS;    BUSHINGS;    OSCILLATIONS;    SLIDING;    FRICTION;    TORQUE;    WEAR;    PERFORMANCE TESTS;    METAL MATRIX COMPOSITES;    NICKEL ALLOYS;    BEARINGS;    SHAFTS (MACHINE ELEMENTS);    TRIBOLOGY;    GAS TURBINE ENGINES;   

RP-ID  :  NASA/TM-2019-220038,E-19637,GRC-E-DAA-TN63032

学科分类：机械工程学

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

Small bore (6.35 millimeter) bushings, made from NASA PM400 solid lubricant composite, were evaluated in oscillatory sliding contact against a nickel-based superalloy shaft. Tests were conducted in air from 25 to 900 degrees Centigrade for extended periods (1 million cycles, plus or minus 15 degrees, 1 hertz) to assess the suitability of PM400 in gas turbine and reciprocating engine exhaust gas path control valve applications. Operating torque and estimated friction was monitored throughout the test duration and wear was measured at the end of test. In general, friction, torque and wear was low. At temperatures above 600 degrees Centigrade, bushing dimensional stability was achieved via short duration pre-test furnace exposure heat treatments. Preliminary test results show that bushings made from NASA PM400 are feasible for aerospace and industrial applications.