Shape Sensing for Wings with Spars and Ribs Using Simulated Strain

Pak, Chan-Gi

关键词: AERODYNAMIC BALANCE;    COMMERCIAL AIRCRAFT;    DELTA WINGS;    SWEPT WINGS;    RIBS (SUPPORTS);    REAL TIME OPERATION;    FLEXIBLE WINGS;    DEFORMATION;    CURVATURE;    PROTOTYPES;   

RP-ID  :  AFRC-E-DAA-TN61538

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

Active trim shape control can be used to minimize error between target and actual aircraft trim shape during flight. Trim shape sensing for aircraft during flight is not only important for highly flexible aircraft, such as the National Aeronautics and Space Administration (NASA) Helios Prototype remotely piloted flying wing aircraft, but also for a delta-wing type aircraft, such as a supersonic commercial transport aircraft. A two-step theory utilizing distributed strain for a real-time shape sensing of a full three-dimensional structure has been introduced previously. This study focuses on the application of the two-step theory to finite element models of a wing with spars and ribs such as the X-59 QueSST aircraft (Lockheed Martin Corporation, Bethesda, Maryland), a tapered wing, a dihedral/anhedral wing, and a stiffened dihedral/anhedral wing. A finely meshed finite element structural model is desired to capture accurate curvature distributions along the neutral axes of the wing cross sections during pre-test analysis for shape sensing of a wing with ribs and spars. The two-step theory used in this study gives excellent deformation correlation with the MSC/NASTRAN (MSC Software, Newport Beach, California) results along the neutral axis for all test cases used in this study except the X-59 QueSST aircraft.