1-Watt Radioisotope Power System for Small Spacecraft

Wilson, Scott

关键词: AC GENERATORS;    BREADBOARD MODELS;    CONTROLLERS;    ELECTRIC BATTERIES;    INSULATION;    MOON;    PISTON ENGINES;    RADIOISOTOPE BATTERIES;    ALTERNATING CURRENT;    COMPUTATIONAL FLUID DYNAMICS;    FIELD EFFECT TRANSISTORS;    GALACTIC COSMIC RAYS;    LOADS (FORCES);    STIRLING CYCLE;   

RP-ID  :  GRC-E-DAA-TN61525

学科分类：工程和技术（综合）

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

A variety of mission concepts have been studied by NASA and the U. S. Department of Energy that would utilize low power Radioisotope Power Systems (RPS) for small probes, landers, rovers, and communication repeaters. These missions would contain science measuring instruments that could be distributed across planetary surfaces for operation in temporarily or permanently shadowed regions. High efficiency dynamic RPS could be mission enabling for science measurements on the moon, such as collecting real-time, event-based, or cumulative space radiation measurements including primary galactic cosmic rays (GCR), solar particle events (SPE), and secondary particles liberated during atmospheric and/or surface reactions. Small RPS would use fractional versions of the General Purpose Heat Source (GPHS) or Light Weight Radioisotope Heater Units (LWRHU), to heat the power conversion technologies. Capable of three to four times higher conversion efficiency than static technologies, dynamic RPS would provide an equal amount of power using less fuel or more power using an equal amount of fuel. Providing spacecraft with more power could decrease duty cycling of basic functions and increase the quality and abundance of science data. Low power Stirling convertors are being developed at NASA Glenn Research Center (GRC) to provide future micro spacecraft with electrical power by converting heat from one or more LWRHUs. An initial concept would convert eight Watts of heat to one Watt of electrical power output for science instruments and communication. The initial design, called Small Stirling Technology Exploration Power (smallSTEP), is 11 cm diameter X 32 cm long, weighs around 3 kg, and could be used to charge batteries or capacitors for higher power burst usage. Development of the 1-watt RPS includes maturation of a Stirling engine and linear alternator, an electronics controller, and an evacuated metal foil insulation package. Test hardware and facilities are being prepared for initial demonstration of the subassemblies in a laboratory environment.