Dielectric Barrier Discharge (DBD) Plasma Actuators for Flow Control in Turbine Engines: Simulation of Flight Conditions in the Laboratory by Density Matching

Ashpis, David E [Point of Contact] ; Thurman, Douglas R

关键词: DIELECTRICS;    BARRIER LAYERS;    GAS DISCHARGES;    PLASMAS (PHYSICS);    ACTUATORS;    GAS FLOW;    GAS TURBINE ENGINES;    ACTIVE CONTROL;    FLIGHT SIMULATION;    FLIGHT CONDITIONS;    GAS DENSITY;    NUMERICAL FLOW VISUALIZATION;   

RP-ID  :  GRC-E-DAA-TN60543

学科分类：航空航天科学

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

We address requirements for laboratory testing of AC Dielectric Barrier Discharge (AC-DBD) plasma actuators for active flow control in aviation gas turbine engines. The actuator performance depends on the gas discharge properties, which, in turn, depend on the pressure and temperature. It is technically challenging to simultaneously set test-chamber pressure and temperature to the flight conditions. We propose that the AC-DBD actuator performance depends mainly on the gas density, when considering ambient conditions effects. This enables greatly simplified testing at room temperature with only chamber pressure needing to be set to match the density at flight conditions. For turbine engines, we first constructed generic models of four engine thrust classes; 300-, 150-, 50-passenger, and military fighter, and then calculated the densities along the engine at sea-level takeoff and altitude cruise conditions. The range of chamber pressures that covers all potential applications was found to be from 3 to 1256 kPa (0.03 to 12.4 atm), depending on engine-class, flight altitude, and actuator placement in the engine. The engine models are non-proprietary and can be used as reference data for evaluation requirements of other actuator types and for other purposes. We also provided examples for air vehicles applications up to 19,812 m (65,000 ft).