Distributed-Flap Layout Trade Study on a Highly Flexible Common Research Model

Rodriguez, David L ; Aftosmis, Michael J ; Nemec, Marian ; Anderson, George R

关键词: WING FLAPS;    LAYOUTS;    TRADEOFFS;    FLEXING;    AIRCRAFT MODELS;    AERODYNAMIC CHARACTERISTICS;    AEROELASTIC RESEARCH WINGS;    DEFLECTION;    DRAG REDUCTION;    WINGS;    AIRCRAFT DESIGN;    COMPUTATIONAL GEOMETRY;    MACH NUMBER;    AIRCRAFT CONFIGURATIONS;    TRAILING EDGE FLAPS;    CAMBER;   

RP-ID  :  ARC-E-DAA-TN49666,ARC-E-DAA-TN57376

学科分类：航空航天科学

美国|英语

来源: NASA Technical Reports Server

【 摘 要 】

The results of a layout trade study of a full-span, trailing-edge flap system for the NASACommon Research Model (CRM) are presented. Previously developed analysis and design tools areused to determine the potential performance benefits of several flap layouts on a highlyflexible version of the aircraft wing. The wing is first re-twisted for optimal aerodynamicperformance at the design cruise condition while addressing aeroelastic effects. Several flaplayouts are then installed on the new baseline wing. The deflection of each segment on allflap layouts is then optimized for aerodynamic performance at an overspeed flight conditionto ascertain the effectiveness of each flap system. The results indicate that employing two-segmentflaps greatly improves overspeed performance as compared to using no or justsingle-segment flaps. The study also showed that additional segments offer only incrementalimprovements in performance. The results also show that using only four spanwise flaps canproduce meaningful performance gains. Overall, the trade study results suggest a simpledistributed flap system (four spanwise flaps with two segments each) can reduce the drag ofthe Common Research Model by 13 counts at a Mach number that is 3.5 percent higher than thedesign cruise point.