Effect of shell drilling stiffness on response calculations of rectangular plates and tubes of rectangular cross-section under compression.

Gorman, Jhana ; Hales, Jason Dean ; Corona, Edmundo

Sandia National Laboratories

关键词: Compression;    Rotation;    Structural Design-Mathematical Models.;    Shells;    Structural Engineering.;   

DOI  :  10.2172/983668
RP-ID  :  SAND2010-2810
RP-ID  :  AC04-94AL85000
RP-ID  :  983668

美国|英语

来源: UNT Digital Library

【 摘 要 】

This report considers the calculation of the quasi-static nonlinear response of rectangular flat plates and tubes of rectangular cross-section subjected to compressive loads using quadrilateralshell finite element models. The principal objective is to assess the effect that the shell drilling stiffness parameter has on the calculated results. The calculated collapse load of elastic-plastic tubes of rectangular cross-section is of particular interest here. The drilling stiffness factor specifies the amount of artificial stiffness that is given to the shell element drilling Degree of freedom (rotation normal to the plane of the element). The element formulation has no stiffness for this degree of freedom, and this can lead to numerical difficulties. The results indicate that in the problems considered it is necessary to add a small amount of drilling tiffness to obtain converged results when using both implicit quasi-statics or explicit dynamics methods. The report concludes with a parametric study of the imperfection sensitivity of the calculated responses of the elastic-plastic tubes with rectangular cross-section.