Thermal Properties of Structural Materials Found in Light Water Reactor Vessels

Daw, J. E. ; Rempe, J. L. ; Knudson, D. L.

Idaho National Laboratory

关键词: Specific Heat;    Building Materials;    Reactor Vessels;    Capacity;    36 Materials Science;   

DOI  :  10.2172/974795
RP-ID  :  INL/EXT-09-16121
RP-ID  :  DE-AC07-05ID14517
RP-ID  :  974795

美国|英语

来源: UNT Digital Library

【 摘 要 】

High temperature material property data for structural materials used in existing Light Water Reactors (LWRs) are limited. Often, extrapolated values recommended in the literature differ significantly. To reduce such uncertainties, new data for SA533 Grade B, Class 1 (SA533B1) low alloy steel, Stainless Steel 304 (SS304), and Inconel 600, found in Light Water Reactor (LWR) vessels and penetrations, were acquired and tested using material property systems available at the High Temperature Test Laboratory (HTTL) at the Idaho National Laboratory (INL). Properties measured include thermal expansion, specific heat capacity, and thermal diffusivity for temperatures up to 1200 oC. From these results, thermal conductivity and density were calculated. Results show that, in some cases, previously recommended values for these material differ significantly from measured values at high temperatures. This is especially true for SA533B1, as previous data do not account for the phase transformation of this material between 740 oC and 840 oC.