Multilayer co-extrusion technique for developing high energy density organic devices.

Spangler, Scott W. ; Schroeder, John Lee ; Mrozek, Randy (Army Research Lab, Adelphi, MD) ; Bieg, Lothar Franz ; Rao, Rekha Ranjana ; Lenhart, Joseph Ludlow (Army Research Lab, Adelphi, MD) ; Stavig, Mark Edwin ; Cole, Phillip James (Northrop-Grumman, Herndon, VA) ; Mondy, Lisa Ann ; Winter, Michael R. ; Schneider, Duane Allen

Sandia National Laboratories

关键词: Dielectric Materials;    Polymers;    Processing;    36 Materials Science;    Capacitors;   

DOI  :  10.2172/973362
RP-ID  :  SAND2009-7718
RP-ID  :  AC04-94AL85000
RP-ID  :  973362

美国|英语

来源: UNT Digital Library

【 摘 要 】

The purpose of this project is to develop multi-layered co-extrusion (MLCE) capabilities at Sandia National Laboratories to produce multifunctional polymeric structures. Multi-layered structures containing layers of alternating electrical, mechanical, optical, or structural properties can be applied to a variety of potential applications including energy storage, optics, sensors, mechanical, and barrier applications relevant to the internal and external community. To obtain the desired properties, fillers must be added to the polymer materials that are much smaller than the end layer thickness. We developed two filled polymer systems, one for conductive layers and one for dielectric layers and demonstrated the potential for using MLCE to manufacture capacitors. We also developed numerical models to help determine the material and processing parameters that impact processing and layer stability.