An Analysis of Testing Requirements for Fluoride Salt Cooled High Temperature Reactor Components | |
Holcomb, David Eugene ; Cetiner, Mustafa Sacit ; Flanagan, George F ; Peretz, Fred J ; Yoder Jr, Graydon L | |
Oak Ridge National Laboratory | |
关键词: Testing Flouride Salt High-Temperature Reactor Component; Fluorides; Reactor Components; Flouride Salt High-Temperature Reactor Component; Coolants; | |
DOI : 10.2172/970926 RP-ID : ORNL/TM-2009/297 RP-ID : DE-AC05-00OR22725 RP-ID : 970926 |
|
美国|英语 | |
来源: UNT Digital Library | |
【 摘 要 】
This report provides guidance on the component testing necessary during the next phase of fluoride salt-cooled high temperature reactor (FHR) development. In particular, the report identifies and describes the reactor component performance and reliability requirements, provides an overview of what information is necessary to provide assurance that components will adequately achieve the requirements, and then provides guidance on how the required performance information can efficiently be obtained. The report includes a system description of a representative test scale FHR reactor. The reactor parameters presented in this report should only be considered as placeholder values until an FHR test scale reactor design is completed. The report focus is bounded at the interface between and the reactor primary coolant salt and the fuel and the gas supply and return to the Brayton cycle power conversion system. The analysis is limited to component level testing and does not address system level testing issues. Further, the report is oriented as a bottom-up testing requirements analysis as opposed to a having a top-down facility description focus.
【 预 览 】
Files | Size | Format | View |
---|---|---|---|
970926.pdf | 8796KB | download |