Electrostatic Dust Detector with Improved Sensitivity

D.P. Boyle, C.H. Skinner, and A. L. Roquemore

Princeton University. Plasma Physics Laboratory.

关键词: Modifications;    Tokamak Devices Dust, Erosion And Deposition, Iter, P0500 Plasma-Materials Interac Tion, S0100 Safety Of Nuclear Reactors And Components, Co100 Carbon;    Electrostatics;    Dusts;    70 Plasma Physics And Fusion Technology;   

DOI  :  10.2172/959343
RP-ID  :  PPPL-4320
RP-ID  :  DE-ACO2-76CHO3073
RP-ID  :  959343

美国|英语

来源: UNT Digital Library

【 摘 要 】

Methods to measure the inventory of dust particles and to remove dust if it approaches safety limits will be required in next-step tokamaks such as ITER. An electrostatic dust detector, based on a fine grid of interlocking circuit traces, biased to 30 or 50 V, has been developed for the detection of dust on remote surfaces in air and vacuum environments. Gaining operational experience of dust detection on surfaces in tokamaks is important, however the level of dust generated in contemporary short-pulse tokamaks is comparatively low and high sensitivity is necessary to measure dust on a shot-by-shot basis. We report on modifications in the detection electronics that have increased the sensitivity of the electrostatic dust detector by a factor of up to 120, - a level suitable for measurements on contemporary tokamaks.