Filtration and Leach Testing for REDOX Sludge and S-Saltcake Actual Waste Sample Composites

Shimskey, Rick W. ; Billing, Justin M. ; Buck, Edgar C. ; Daniel, Richard C. ; Draper, Kathryn E. ; Edwards, Matthew K. ; Geeting, John GH ; Hallen, Richard T. ; Jenson, Evan D. ; Kozelisky, Anne E. ; MacFarlan, Paul J. ; Peterson, Reid A. ; Snow, Lanee A. ; Swoboda, Robert G.

Pacific Northwest National Laboratory (U.S.)

关键词: Leaching;    Aluminium;    Radioactive Wastes;    Filtration;    Sludges;   

DOI  :  10.2172/953798
RP-ID  :  PNNL-17965
RP-ID  :  AC05-76RL01830
RP-ID  :  953798

美国|英语

来源: UNT Digital Library

【 摘 要 】

A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan.( ) The test program was subdivided into logical increments. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Under test plan TP-RPP-WTP-467, eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. Under this test plan, a waste-testing program was implemented that included: • Homogenizing the archive samples by group as defined in the test plan • Characterizing the homogenized sample groups • Performing parametric leaching testing on each group for compounds of interest • Performing bench-top filtration/leaching tests in the hot cell for each group to simulate filtration and leaching activities if they occurred in the UFP2 vessel of the WTP Pretreatment Facility. This report focuses on filtration/leaching tests performed on two of the eight waste composite samples and follow-on parametric tests to support aluminum leaching results from those tests.