Planar LTCC transformers for high voltage flyback converters: Part II.

Schofield, Daryl (NASCENTechnology, Inc., Watertown, SD) ; Schare, Joshua M., Ph.D. ; Slama, George (NASCENTechnology, Inc., Watertown, SD) ; Abel, David (NASCENTechnology, Inc., Watertown, SD)

Sandia National Laboratories

关键词: Electric Potential;    Transformers;    Ferrite;    42 Engineering;    Limiting Values Planar Transisters.;   

DOI  :  10.2172/947262
RP-ID  :  SAND2009-0434
RP-ID  :  AC04-94AL85000
RP-ID  :  947262

美国|英语

来源: UNT Digital Library

【 摘 要 】

This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material properties and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.