Matching the BtA line to the bare-AGS (Part 1)

Tsoupas,N. ; Glenn, J. W. ; Huan, H. ; MacKay, W. W. ; Raparia, D. ; Zeno, K.

Brookhaven National Laboratory

关键词: Beam Bunchers;    43 Particle Accelerators;    Calculation Methods;    Brookhaven Ags;    Beam Dynamics;   

DOI  :  10.2172/944962
RP-ID  :  BNL--81750-2008-IR
RP-ID  :  DE-AC02-98CH10886
RP-ID  :  944962

美国|英语

来源: UNT Digital Library

【 摘 要 】

The Booster to AGS (BtA) transfer line [Ref for BtA line] transports the beam bunches from the AGS-Booster to the AGS synchrotron, and also matches the beam parameters ({beta}{sub x,y}, {alpha}{sub x,y}) and dispersion functions ({eta}{sub x,y}, {eta}{prime}{sub x,y}) of the transported beam to the corresponding quantities of the circulating beam in AGS, at the AGS injection point. In this technical note we describe in details, the calculations of the matching procedure of the BtA line to the bare-AGS, and provide magnet settings for the MAD-model of the BtA transfer line which is 'matched' to the bare-AGS. In a separate but more concise technical note (Part II) we will present results on the beam optics of the BtA beam line which is 'matched' to the AGS with two helical snakes.