Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability.

Chopra, O. K. ; Shack, W. J. ; Technology, Energy

Argonne National Laboratory

关键词: Building Materials;    Boilers;    36 Materials Science;    Roughness;    Coolants;   

DOI  :  10.2172/925073
RP-ID  :  ANL-02/39
RP-ID  :  DE-AC02-06CH11357
RP-ID  :  925073

美国|其它

来源: UNT Digital Library

【 摘 要 】

The ASME Boiler and Pressure Vessel Code provides rules for the construction of nuclear power plant components. The Code specifies fatigue design curves for structural materials. However, the effects of light water reactor (LWR) coolant environments are not explicitly addressed by the Code design curves. Existing fatigue strain-vs.-life ({var_epsilon}-N) data illustrate potentially significant effects of LWR coolant environments on the fatigue resistance of pressure vessel and piping steels. This report provides an overview of the existing fatigue {var_epsilon}-N data for carbon and low-alloy steels and wrought and cast austenitic SSs to define the effects of key material, loading, and environmental parameters on the fatigue lives of the steels. Experimental data are presented on the effects of surface roughness on the fatigue life of these steels in air and LWR environments. Statistical models are presented for estimating the fatigue {var_epsilon}-N curves as a function of the material, loading, and environmental parameters. Two methods for incorporating environmental effects into the ASME Code fatigue evaluations are discussed. Data available in the literature have been reviewed to evaluate the conservatism in the existing ASME Code fatigue evaluations. A critical review of the margins for ASME Code fatigue design curves is presented.