Simulations of carbon fiber composite delamination tests

Kay, G

Lawrence Livermore National Laboratory

关键词: Testing;    36 Materials Science;    Carbon Fibers;    42 Engineering;    Composite Materials;   

DOI  :  10.2172/923091
RP-ID  :  UCRL-TR-235907
RP-ID  :  W-7405-ENG-48
RP-ID  :  923091

美国|英语

来源: UNT Digital Library

【 摘 要 】

Simulations of mode I interlaminar fracture toughness tests of a carbon-reinforced composite material (BMS 8-212) were conducted with LSDYNA. The fracture toughness tests were performed by U.C. Berkeley. The simulations were performed to investigate the validity and practicality of employing decohesive elements to represent interlaminar bond failures that are prevalent in carbon-fiber composite structure penetration events. The simulations employed a decohesive element formulation that was verified on a simple two element model before being employed to perform the full model simulations. Care was required during the simulations to ensure that the explicit time integration of LSDYNA duplicate the near steady-state testing conditions. In general, this study validated the use of employing decohesive elements to represent the interlaminar bond failures seen in carbon-fiber composite structures, but the practicality of employing the elements to represent the bond failures seen in carbon-fiber composite structures during penetration events was not established.