Eye safe short range standoff aerosol cloud finder.

Bambha, Ray P. ; Schroder, Kevin L. ; Reichardt, Thomas A.

Sandia National Laboratories

关键词: Aerosols;    Indoor Air Pollution;    Clouds-Remote Sensing;    Sensitivity Infrared Detectors.;    Eye;   

DOI  :  10.2172/922078
RP-ID  :  SAND2005-0840
RP-ID  :  AC04-94AL85000
RP-ID  :  922078

美国|英语

来源: UNT Digital Library

【 摘 要 】

Because many solid objects, both stationary and mobile, will be present in an indoor environment, the design of an indoor aerosol cloud finding lidar (light detection and ranging) instrument presents a number of challenges. The cloud finder must be able to discriminate between these solid objects and aerosol clouds as small as 1-meter in depth in order to probe suspect clouds. While a near IR ({approx}1.5-{micro}m) laser is desirable for eye-safety, aerosol scattering cross sections are significantly lower in the near-IR than at visible or W wavelengths. The receiver must deal with a large dynamic range since the backscatter from solid object will be orders of magnitude larger than for aerosol clouds. Fast electronics with significant noise contributions will be required to obtain the necessary temporal resolution. We have developed a laboratory instrument to detect aerosol clouds in the presence of solid objects. In parallel, we have developed a lidar performance model for performing trade studies. Careful attention was paid to component details so that results obtained in this study could be applied towards the development of a practical instrument. The amplitude and temporal shape of the signal return are analyzed for discrimination of aerosol clouds in an indoor environment. We have assessed the feasibility and performance of candidate approaches for a fieldable instrument. With the near-IR PMT and a 1.5-{micro}m laser source providing 20-{micro}J pulses, we estimate a bio-aerosol detection limit of 3000 particles/l.