Insulation and Heat Treatment of Bi-2212 Wire for Wind-and-React Coils

Hwang, Peter K. F.

Advanced Magnetic and Cryogenic, LLC

关键词: Testing;    Muons;    43 Particle Accelerators;    Thermonuclear Reactors Hts Wire, Bi-2212, React-And-Wind, Wind-And-React.;    Superconducting Wires;   

DOI  :  10.2172/918056
RP-ID  :  AMC20071
RP-ID  :  FG02-06ER84451
RP-ID  :  918056

美国|英语

来源: UNT Digital Library

【 摘 要 】

Higher Field Magnets demand higher field materials such as Bi-2212 round superconducting wire. The Bi-2212 wire manufacture process depends on the coil fabrication method and wire insulation material. Considering the wind-and-react method, the coil must unifirmly heated to the melt temperature and uniformly cooled to the solidification temperature. During heat treat cycle for tightly wound coils, the leakage melt from conductor can chemically react with insulation on the conductor and creat short turns in the coils. In this research project, conductor, insulation, and coils are made to systemically study the suitable insulation materials, coil fabrication method, and heat treatment cycles. In this phase I study, 800 meters Bi-2212 wire with 3 different insulation materials have been produced. Best insulation material has been identified after testing six small coils for insulation integrity and critical current at 4.2 K. Four larger coils (2" dia) have been also made with Bi-2212 wrapped with best insulation and with different heattreatment cycle. These coils were tested for Ic in a 6T background field and at 4.2 K. The test result shows that Ic from 4 coils are very close to short samples (1 meter) result. It demonstrates that HTS coils can be made with Bi-2212 wire with best insulation consistently. Better wire insulation, improving coil winding technique, and wire manufacture process can be used for a wide range of high field magnet application including acclerators such as Muon Collider, fusion energy research, NMR spectroscopy, MRI, and other industrial magnets.