Naval Waste Package Design Sensitivity

Schmitt, T.

United States. Department of Energy. Yucca Mountain Project Office.

关键词: Corrosion;    Response Functions;    Sensitivity Analysis;    Radioactive Wastes;    Impact Tests;   

DOI  :  10.2172/899462
RP-ID  :  000-00C-DN00-00300-000-00A, Rev. 00A
RP-ID  :  NA
RP-ID  :  899462

美国|英语

来源: UNT Digital Library

【 摘 要 】

The purpose of this calculation is to determine the sensitivity of the structural response of the Naval waste packages to varying inner cavity dimensions when subjected to a comer drop and tip-over from elevated surface. This calculation will also determine the sensitivity of the structural response of the Naval waste packages to the upper bound of the naval canister masses. The scope of this document is limited to reporting the calculation results in terms of through-wall stress intensities in the outer corrosion barrier. This calculation is intended for use in support of the preliminary design activities for the license application design of the Naval waste package. It examines the effects of small changes between the naval canister and the inner vessel, and in these dimensions, the Naval Long waste package and Naval Short waste package are similar. Therefore, only the Naval Long waste package is used in this calculation and is based on the proposed potential designs presented by the drawings and sketches in References 2.1.10 to 2.1.17 and 2.1.20. All conclusions are valid for both the Naval Long and Naval Short waste packages.