On-line coating of glass with tin oxide by atmospheric pressure chemical vapor deposition.

Allendorf, Mark D. ; Sopko, J.F. (PPF Industries, Pittsburgh, PA) ; Houf, William G. ; Chae, Yong Kee ; McDaniel, Anthony H. ; Li, M. (PPF Industries, Pittsburgh, PA) ; McCamy, J.W. (PPF Industries, Pittsburgh, PA)

Sandia National Laboratories

关键词: Fluid Mechanics;    Chemical Reactions;    Glass Coatings.;    Glass Industry;    Glass Manufacture.;   

DOI  :  10.2172/897642
RP-ID  :  SAND2006-6225
RP-ID  :  AC04-94AL85000
RP-ID  :  897642

美国|英语

来源: UNT Digital Library

【 摘 要 】

Atmospheric pressure chemical vapor deposition (APCVD) of tin oxide is a very important manufacturing technique used in the production of low-emissivity glass. It is also the primary method used to provide wear-resistant coatings on glass containers. The complexity of these systems, which involve chemical reactions in both the gas phase and on the deposition surface, as well as complex fluid dynamics, makes process optimization and design of new coating reactors a very difficult task. In 2001 the U.S. Dept. of Energy Industrial Technologies Program Glass Industry of the Future Team funded a project to address the need for more accurate data concerning the tin oxide APCVD process. This report presents a case study of on-line APCVD using organometallic precursors, which are the primary reactants used in industrial coating processes. Research staff at Sandia National Laboratories in Livermore, CA, and the PPG Industries Glass Technology Center in Pittsburgh, PA collaborated to produce this work. In this report, we describe a detailed investigation of the factors controlling the growth of tin oxide films. The report begins with a discussion of the basic elements of the deposition chemistry, including gas-phase thermochemistry of tin species and mechanisms of chemical reactions involved in the decomposition of tin precursors. These results provide the basis for experimental investigations in which tin oxide growth rates were measured as a function of all major process variables. The experiments focused on growth from monobutyltintrichloride (MBTC) since this is one of the two primary precursors used industrially. There are almost no reliable growth-rate data available for this precursor. Robust models describing the growth rate as a function of these variables are derived from modeling of these data. Finally, the results are used to conduct computational fluid dynamic simulations of both pilot- and full-scale coating reactors. As a result, general conclusions are reached concerning the factors affecting the growth rate in on-line APCVD reactors. In addition, a substantial body of data was generated that can be used to model many different industrial tin oxide coating processes. These data include the most extensive compilation of thermochemistry for gas-phase tin-containing species as well as kinetic expressions describing tin oxide growth rates over a wide range of temperatures, pressures, and reactant concentrations.