Low Temperature Waste Immobilization Testing Vol. I

Russell, Renee L. ; Schweiger, Michael J. ; Westsik, Joseph H. ; Hrma, Pavel R. ; Smith, D. E. ; Gallegos, Autumn B. ; Telander, Monty R. ; Pitman, Stan G.

Pacific Northwest National Laboratory (U.S.)

关键词: Leaching;    Geopolymer;    Waste Form;    Testing;    Sodium;   

DOI  :  10.2172/894485
RP-ID  :  PNNL-16052 Rev. 1
RP-ID  :  AC05-76RL01830
RP-ID  :  894485

美国|英语

来源: UNT Digital Library

【 摘 要 】

The Pacific Northwest National Laboratory (PNNL) is evaluating low-temperature technologies to immobilize mixed radioactive and hazardous waste. Three waste forms—alkali-aluminosilicate hydroceramic cement, “Ceramicrete” phosphate-bonded ceramic, and “DuraLith” alkali-aluminosilicate geopolymer—were selected through a competitive solicitation for fabrication and characterization of waste-form properties. The three contractors prepared their respective waste forms using simulants of a Hanford secondary waste and Idaho sodium bearing waste provided by PNNL and characterized their waste forms with respect to the Toxicity Characteristic Leaching Procedure (TCLP) and compressive strength. The contractors sent specimens to PNNL, and PNNL then conducted durability (American National Standards Institute/American Nuclear Society [ANSI/ANS] 16.1 Leachability Index [LI] and modified Product Consistency Test [PCT]) and compressive strength testing (both irradiated and as-received samples). This report presents the results of these characterization tests.