Twinning in Laves Phases by Synchroshear: Atomic Mechanisms and Compositional Contro

Luzzi, David E. ; Pope, David P.

University of Pennsylvania

关键词: Compression;    Intermetallic Compounds;    Ductility;    36 Materials Science;    Flow Stress;   

DOI  :  10.2172/891783
RP-ID  :  DOE/ER/45641-F
RP-ID  :  FG02-97ER45641
RP-ID  :  891783

美国|英语

来源: UNT Digital Library

【 摘 要 】

Compression tests between 4.2 and 1273 K, compositional variation and conventional transmission electron microscopy were used to investigate the deformation and twinning behavior of C15 HfV{sub 2}+Nb - based Laves phase alloys. We chose two phase C15/bcc alloys to improve the ambient temperature ductility which has not been found in the single phase Laves intermetallic compound. Transmission electron microscopy revealed that substantial mechanical twinning takes place in the C15 Laves phase matrix at room temperature and 77 K. A deep minimum in the flow stress, with a drop of nearly 500 MPa, appears at around 77 K in the C15/bcc two-phase alloy with C15 matrix. Since no such anomaly is seen in the bcc phase, we believe that the cause of this can be attributed to mechanical twinning in the C15 Laves phase. Twin bands observed in the C15 matrix of deformed samples at both 298 K and 77 K can be classified into three categories by their thicknesses; coarse twin bands about 10 nm to several hundreds nm thick, fine twin bands around 3 to 10 nm thick, and ultra fine twin bands with average thickness of 1.5 nm. A high density of ultra-fine twin bands is the characteristic feature of twinning in the C15 matrix. They belong to the <112>(111) twinning system and commonly intersect with each other.