URANIUM AND PLUTONIUM LOADING ONTO MONOSODIUM TITANATE MST IN TANK 50H

Hobbs, D

Savannah River Site (S.C.)

关键词: Removal;    Criticality;    Uranium;    Liquid Wastes;    Actinides;   

DOI  :  10.2172/891662
RP-ID  :  WSRC-STI-2006-00003
RP-ID  :  DE-AC09-96SR18500
RP-ID  :  891662

美国|英语

来源: UNT Digital Library

【 摘 要 】

A possible disposition pathway for the residue from the abandoned In-Tank Precipitation (ITP) sends the material from Tank 48H in increments to Saltstone via aggregation in Tank 50H. After entering Tank 50H, the amount of fissile material sorbed on MST may increase as a result of contacting waste solutions with dissolved uranium and plutonium. SRNL recommends that nuclear criticality safety evaluations use uranium and plutonium loadings onto MST of 14.0 {+-} 1.04 weight percent (wt %) for uranium and 2.79 {+-} 0.197 wt % for plutonium given the assumed streams defined in this report. These values derive from recently measured for conditions relevant to the Actinide Removal Process (ARP) and serve as conservative upper bounds for uranium and plutonium loadings during the proposed transfers of MST from Tank 48H into Tank 50H.