Ion Trapping in the SLAC B-factory High Energy Ring

Villevald, D. ; Heifets, S.

Stanford Linear Accelerator Center

关键词: Betatrons;    Oscillations;    Quadrupoles;    Other,Other;    Electrodes;   

DOI  :  10.2172/891230
RP-ID  :  SLAC-TN-06-032
RP-ID  :  AC02-76SF00515
RP-ID  :  891230

美国|英语

来源: UNT Digital Library

【 摘 要 】

The presence of trapped ions in electron storage rings has caused significant degradation in machine performance. The best known way to prevent the ion trapping is to leave a gap in the electron bunch train. The topic of this paper is the dynamics of ions in the field of the bunch train with uneven bunch filling. We consider High Energy Ring (HER) of the PEP-II B-factory. In the first section we summarize mechanisms of the ion production. Then the transverse and longitudinal dynamics are analyzed for a beam with and without gap. After that, the effect of the ions is considered separating all ions in the ring in several groups depending on their transverse and longitudinal stability. The main effects of the ions are the tune shift and the tune spread of the betatron oscillations of the electrons. The tune spread is produced by bunch to bunch variation of the electric field of ions and by nonlinearity of the field. It is shown that the main contribution to the shift and spread of the betatron tune of the beam is caused by two groups of ions: one-turn ions and trapped ions. One-turn ions are the ions generated during the last passage of the bunch train. Trapped ions are the ions with stable transverse and longitudinal motion. In the last section we discuss shortly related problems of parameters of the clearing electrodes, injection scenario, and collective effects. Clearing electrodes should be located at the defocusing in x-plane quadrupole magnets. An electric DC field of value 1.0 kv/cm will be enough to prevent the ion trapping process. During the injection, it is recommended to fill the bucket with the design number of the particles per bunch N{sub B} before going to the next bucket. In addition, it is recommended to have the sequential filling of the ring, i.e. the filling from one bucket to the next sequentially. It was shown that ions will not be trapped at the location of the interaction point. The reason for this is that the current of the positron beam is twice as large as the current of the electron beam, while the transverse sizes of both the electron and positron beams are equal at the IP. It is shown that the linear ion's oscillations can not result in the longitudinal coupled beam instabilities.